Case Study: Front Sweeper for John Deere 3-Series

The Kersten KM45 front sweepers are a great solution for this size machine.  They may be powered by either PTO or hydraulic drive - Both solutions are available on the John Deere 3 series but there are pros and cons of each. On the 3720 there is plenty of hydraulic flow, so the most cost effective option is to run a completely hydraulic system using services at the front of the tractor.

This sweeper was fitted with a collector box and dust suppression kit - allowing it to easily collect dust and fine material without a mess. The 5 row spiral brush has plenty of space between the rows to allow movement of voluminous material like snow and requires less power than other brushes to do so. The brush can be hydraulically angled from left to right in this case, so all functions of the sweeper can be operated from the cab.

The items used in this project were as follows:

1. KM 15045 H Front mounted sweeper
2. ABR brackets to fit front sweeper to the Cat 0 front linkage
3. SSB 15045 K - Collector Box
4. WAS 200 KAT 1
5. Front Linkage for John Deere 3 Series

The KM 45 series of sweepers are supplied with garage stands to enable the machine to be wheeled around when not connected to the tractor.

Mounting a sweeper on the front of a tractor provides far greater manoeuvrability than mounting on the rear 3 point linkage and prevents driving over the material first, which could compact it under the tyres - making it harder to sweep..

However a rear mounted alternative for the John Deere 3 Series could be the HKM 15040 M

Kersten sweepers are great at maintaining hard surfaces by removing detritus and debris which reduces weed growth and is fundamental to Integrated weed management.

Other attachments suitable for the John Deere 3 Series may be found on the John Deere 3 Series Attachments page.

Contact Kersten to chat about your requirements.